1-day packer - steel
Ø 22 x 185 mm
Advantage/Notice
- All working steps can be carried out on one day
- Due to the integrated check valve no injection material may run back through the packer
- The thrust piece can be removed directly after the injection
- The borehole can be sealed with appropriate material
- The sealing system keeps the clamping rubber tensioned
- Opening pressure approx. 10 - 15 bar
Material to be used
- acrylate gel
- 1C injection resin
- silicate resin
- epoxy resin
- polyurethane
- quick-foaming polyurethane
- 2C injection resin
- 2C polyurethane
Technical data
| opening pressure | approx. 5 bar |
Accessories
2 Variants
4 Variants
5 Variants
