Menu

Anchoring system - Special

More Informations
Filter
Filter
Page
12

DESOI Anchor system - SPecial

Are you looking for special anchoring systems for your building project? Here you will find individual accessories to stabilise your construction/object. In addition, DESOI also manufactures individual products, which are exactly adapted to your needs.
Just contact us.
DESOI Verankerungssystem 
DESOI Anchor Systems

 open PDF

Filling packer with anchor

Procedure

  • Clean the borehole with a blow-out lance
  • Insert stainless steel anchors centric into the boreholes using suitable spacers and filling packers
  • Mix the DESOI AnchorNox® dry mortar and prepare the screw pump
  • Inject filling material, the existing air can escape through the venting hose (after complete venting kink the hose) the borehole will be completely filled
  • Close the filling packer with the cap
  • Remove the filling packer after hardening of the material
  • Seal boreholes

Advantage

  • Time saving by simple and quick setting of the filling packers
  • The filling packer can be easily removed after injection and is reusable after cleaning

Aims of application

  • Establishing a force-locking connection
  • Gentle restoration of objects under historical preservation protection

Filling - Filling piece with anchor

Procedure

  • Clean the borehole with a blow-out lance
  • Put the stainless steel anchor centric in the borehole with a suitable spacer, material pipe and filling piece
  • Screw the locking piece onto the material line
  • Mix the DESOI AnchorNox® dry mortar and prepare the screw pump
  • Inject injection material until the material emerges from the vent, close with a plug
  • Fill the hole with anchor mortar from the end of the borehole, deaerated
  • Pull back the material line slowly during the filling and fill all cavaties
  • Close the filling piece with a plug (borehole Ø 10.5 mm)

Advantages

  • Time saving due to simple and fast placement of the filling pieces
  • The filling piece can be easily removed after the injection and is reusable after cleaning

Aims of application

  • Establishing a force-locking connection
  • Gentle restoration of objects under historical preservation protection

DESOI Single load control unit

The patented DESOI Single load control unit is a device for tensioning structures and keeping constant the tensile load. It is able to compensate peak loadings damaging a structure, caused by loads of varying intensity, as e. g. vibrations (heavy goods traffic, bell ringing), changes in temperature and moisture, wind loads, etc.
 
The DESOI Single load control unit is pre-tensioned on a calculated value, and keeps this load constant. An electronic measuring system can record the force path. The installation can take place either with compound effect (compound mortar) or with contact connection (connecting rod / endplate), both, visible or hidden.

 

Tasks and application examples

  • Taking up tensile forces
  • Reduction of peak loadings
  • Stabilisation of structures


Information
The individual dimensioning of each DESOI Single load control unit happens object-related. We would be pleased to advise you in cooperation with an engineering office.



Detail: Installation with compound effect
Example: DESOI Single load control unit installed

DESOI Two-way load control unit

The patented DESOI Two-way load control unit is made for supporting structures and keeping the load constant. Its task is to take up compressive and tensile loads and to compensate peak loadings.
scroll top