SELECT DISTINCT shop_view_active_item.*
INNER JOIN shop_view_active_item ON (
shop_view_active_item.company = shop_item_has_category.company AND
shop_view_active_item.shop_code = shop_item_has_category.shop_code AND
shop_view_active_item.language_code = shop_item_has_category.language_code AND
shop_item_has_category.item_no = shop_view_active_item.item_no
-- LEFT JOIN shop_permissions_group_link ON shop_permissions_group_link.item_no = shop_view_active_item.item_no
-- AND shop_permissions_group_link.company = shop_view_active_item.company
WHERE (shop_item_has_category.category_line_no = 157187)
AND shop_view_active_item.language_code = 'ENU'
AND shop_view_active_item.company = 'DESOI'
AND shop_view_active_item.shop_code = 'B2B'
AND shop_item_has_category.company = 'DESOI'
AND shop_item_has_category.shop_code = 'B2B'
AND shop_item_has_category.language_code = 'ENU'
AND shop_item_has_category.category_shop_code = 'B2B'
allow the realisation of foundations or foundation strengthening of a structure within very short time. The low weight and the easy installation enable the application in nearly all foundation grounds and at almost every place. The helical design of the DESOI Piles generates a unique ratio between cross section and total surface for a high transfer of the tensile and compressive forces into the foundation ground. The extremely corrosion resistant aluminium alloy permits the use in aggressive soil. As a result, even under the most unfavourable conditions a lifetime can be granted that exceeds the minimum working life of 80 years for permanent buildings. Micropiles DESOI Pile are 1m and available in two versions 60 and 100 mm, with different bearing load.
The installation of the DESOI Piles is carried out using hand-held or mini-excavator driven hydraulic hammers
driving the pile into the foundation ground. Thus neither excavation nor earthmoving are required and nearly
no vibrations are generated that may affect surrounding areas or buildings. Immediately after installation, the
piles can be loaded. DESOI Piles are of multiple use and can be removed after the installation. In addition to
making foundations for new structures, the piles are ideal for foundation strengthening of existing structures.
The piles are available as 1 meter segments, in the nominal diameters 60 mm and 100 mm, and with different
load bearing capacities.
The results of the pile load tests correspond with the calculated values in consideration
of skin friction and end resistance for bored piles. For design, calculations
taking into account the experienced data with a partial safety factor of h = 2.0 are
applicable. An object-related load testing allows the application of lower partial
safety factors as thereby possible errors and inaccuracies are omitted when the
experienced values are transferred to the pile to be designed. The basis for a
design are site investigations.
- Fast installation
- No damages to surrounding areas
- Immediately loadable and testable
- Simple and lightweight driving equipment
- No concrete
- No excavation / earthmoving required
- Extremely durable
- Highly resistant to tensile and compressive forces
During pile load tests in cohesive soils the following average pile resistances have been achieved